BKK-A RING (with stop) for clay pipe connection with
socket K and S to connection system C

Advantages of the BKK-A ring: the stop is matched to the clay pipe inner
diameter, possibility of paving gutters without additional gauge. No need
for additional work in the facing area of the gutter. The dimensional accuracy of the BKK-A ring, especially the dimension d4, must be ensured
during shaft production. DN 200, 250 and 300 from S/B, DN 400, 500 and 600 from ABS/GF.

Suitable for clay pipes to
DIN EN 295.

KGSM-S/B shaft connector for clay pipe connection with socket L to connection system F

Very good adhesion to the surrounding concrete due to the outer shape and surface texture, providing a waterproof connection. High inherent stability, low weight. Stop as guide for gutter installation. Good cleaning possibility due to loosely inserted seals.

The "R 50" versions are provided with concave stub connectors (radius 50 cm), which ensures a closed joint in the area of the shaft inner wall (DN 1000).

Suitable for clay pipes to DIN EN 295.

Technical advantages:

- Direct connection of clay pipes DN 150 and 200, insert sleeve L
- Very high inherent stability of the KGSM.
- Tight connection to the requirements of DIN EN 1917 and DIN V 4034-1
- Easy installation for shaft bottom production, stop as guide for gutter
installation, and easy pipe-fitting on the construction site.

Cost-saving due to the omission of transition components such as jointed adapter pieces or fitting rings for pipe connection.

Suitable for clay pipes to DIN EN 295.

KGF-S/B shaft connector for PVC-KG pipe connection

Very good waterproof adhesion to the surrounding concrete due to the profiling and textured surface. Easy introduction of the pipe guaranteed (angle ±3°]. High impact resistance and low weight. The seals approved, for KG pipes are used.

Suitable for PVC drainage pipes to DIN EN 1401-1.

Information on the availability of special lengths of KGF-S/B shaft connector is available on request..

KGE-S/B shaft connector for PVC-KG pipe connection

Very good adhesion to the surrounding concrete due to the outer shape and surface texture, providing a waterproof connection. Low weight. The seals approved for KG pipes are used.

Suitable for PVC drainage pipes to DIN EN 1401-1

PEGSF-S/B shaft connector for PE-HD drainage pipe connection

Very good waterproof adhesion to the surrounding concrete due to the profiling and textured surface. Easy introduction of the pipe guaranteed (angle ±3°]. High impact resistance and low weight. The seals approved for KG pipes are used.

Suitable for PE-HD drainage pipes to DIN EN 12666

FITTING RING for KGF-S/B and PEGSF-S/B shaft connector and extension

The fitting ring prevents the penetration of concrete between the shaft connector and core during production of the shaft. It then serves as a guide for the installation of the gutter. The accurate adjustment of the ring to the inner pipe diameter ensures a smooth transition from the shaft gutter to the PVC-KG or PE-HD drainage pipe.

Fixing aid for KGF-S/B and PEGSF-S/B shaft connector and extension

The fixing aid is attached accurately to the formwork by means of nails. The shaft connector is then placed on the fixing ring and therefore positioned accurately. The fixing aids are reusable.

EXTENSION 60 mm for KGF-S/B and PEGSF-S/B length 240 mm

The same favourable material characteristics and connection effects as the KGF-S/B shaft connector. Easy extension of the shaft connector in steps of 60 mm to 300 mm, 360 mm etc.

Suitable for KGF-S/B and PEGSF-S/B

URF-S/B shaft connector for ULTRA-RIB pipes 1 and 2

Very good adhesion to the surrounding concrete due to the outer shape and surface texture, providing a waterproof connection. Retaining cores of other pipe types can be used for the installation of the URF-S/B
through the use of a slotted Ultra-Rib pipe section as an adapter.

VBR-S/B shaft connector for corrugated pipes.

High inherent stability, very good adhesion to the surrounding concrete
and safety against water penetrating behind due to the proven shape and
surface texture. Stop for gutter attachment.

DN 150 suitable for pipes of company Fränkische Rohrwerke, DN 200 to DN 350 info
upon request. We will be happy to provide information on the connection of corrugated pipes
from other manufacturers (e.g. Hegler Drossbach, Rehau etc.) on request.

UNI-F-S/B universal shaft connector for cast iron pipes, SML pipe, GRP pipe,
PE-HD pipe

One single part, suitable for various pipe types. Different sealing rings compensate for the differences in the pipe outer diameters. Through cost-efficient mounting, you can react quickly and flexibly to the special requirements of your customers.

Stop guides for gutter attachment and adapters for automatic installation with your existing retaining cores are available on request.

The gutter must be attached in the shaft according to the inner diameter of
the type of pipe to be connected. All pipe types must be provided with a bevel
at the ends in accordance with the relevant works standard before insertion
into the shaft connector, in order to prevent damage to the seal.

Information on seal selection can be found in the following table. ( » Download PDF )

EURO-F-S/B shaft connector for EuroTop and EuroDrain clay pipes to DIN EN 295 and Drossbach corrugated pipe "Kanadukt 3000" to DIN 16961.

Optimum adhesion and watertightness to the surrounding concrete due
to the shape and surface texture. Stop for gutter attachment.

Information on seal selection can be found in the following table.( » Download PDF )